“Sick Seconds”…

…go ahead… say it out loud a few times… faster now. It just sorta rolls off the tongue, doesn’t it?

I was beyond stoked to get the phone call from Denny Terzich regarding the latest bad-boy project getting underway at ProRides… It was an honor to talk with him and make a new friend to begin with, but even sweeter was that his call was the result of another referral… Nothing makes my day like knowing that a client thought enough of me to “tell a friend”! Suffice to say, it’s another drag car, and shares that killer stance and blistering performance we’ve come to expect after their 2007 Drag Week harbinger of speed ‘67 Camaro.

The rendering!

After accomplishing a major record in Hot Rod Magazine’s Drag Week 2007, ProRides is about to embark on a new level of performance never seen before.

Not only did ProRides head to Drag Week with the intention of beating the old record (think mid-low 8 second 1/4 mile times!), but to finish the event, driving 1,000 miles while pulling a trailer. While the bets were being placed that the clean black Camaro wouldn’t even finish the week, the car shook the hot rod and race world by posting a first pass E.T. of 7.64. Truly the pass heard ’round the world! Granted, the ProRides team was as surprised as anyone, and the venture served to underscore the positive results that come from combining great companies and partnerships with a thorough process.

Chassis construction!

After talking to Rob Kinnan of Hot Rod Magazine at this year’s Drag Week, the ProRides crew had the idea of building a 6-second ET capable car to drive the grueling 1,000 mile Drag Week course. Imagine…. a 6 second ET vehicle driving 200-300 miles per day while pulling a trailer!!! Unheard of, and a true torture test for the components involved… While many have claimed they have a street car that is very fast and even some that state in the 6 second E.T. range, it’s obvious that anyone can idle around at a local car cruise or show. The true test is actually driving the car on the street. This is the reason why the “Fastest Street Car in America” can only be crowned at this event.

Coverage of the build will be inside of Hot Rod Magazine’s “Project Garage” section and on their website. ProRides is also working with Scott Killeen of the BuildBook series to document the entire build… and if you’ll be at the show, check out the rolling chassis at PRI, in the SunCoast Racecars Booth, # 363 South Hall. And of course, look for more updates, as well as that crazy grin plastered to my face…

“If life were fair…”

…Johnny Carson once said, “…Elvis would be alive and all the impersonators would be dead.”

It’s a pretty deep thought. It’s a fitting one, too, as originality seems to be a dying art at times. I fell into a creative funk recently, and began to look at a late crop of cars, and thought “wow… another car on a set of aftermarket rims. How progresssive.” (keep in mind that the cars in question were presented as some “Hot, new!” and “ground-breaking!” rides, and a few were flowing from my pen, seemingly keeping the envelope flat and tidy — no pushing allowed!) It appeared, during that spell, that true automotive personalization was dead… That, just maybe, we had gotten to a stagnant point in the hobby where every car had to adhere to some set of rules to be “cool”… it was high school all over again, oh no! And just when I thought it was, along came a brilliantly conceived idea, and I’m honored to take part in the design process. Suffice to say, a client approached me with his genius take on a truck, and it’s lit a fire, so to speak… In fact, that fire spread quickly to a new piece for a magazine, that I knocked out in record time… (not a truck, but an over-looked car that suddenly hit me like a ton of bricks).

The drive was back, and with a fury… My eyes were opened to a whole new set of possibilities… it was like re-discovering cars. I dug through my notebooks and sketchbooks, and began reviewing them with a newfound purpose. I have set out on a journey, the road paved with unique cars, and seemingly endless possibilities.
 
Talk about timing, too… I needed a creative “goose. Going back a ways, it was about a year ago that we took in the “Curves of Steel” exhibition at the Phoenix Art Museum, which, despite its small size, packed an unexpected punch. It was a great time, just taking in some design work from true masters. Classic forms, many mixed with function light years ahead of their time, all leading to one thought in my mind: I love what I do. I create, literally, passion on paper. It’s not a job, it’s creation of passion. It’s taking an idea and running with it. It’s not something you wake up one day and say “I’m going to design custom cars.” It chooses you, and while it makes you work at it endlessly, it gives back a million times over in satisfaction. Add to that a love for design itself, be it print, sculpture, architecture, whatever… I LOVE it.

Simply put:

When I am approached to design a hot rod, custom, pro-touring ride, whatever, I want to bring out every aspect of the car’s potential, and tie it with the owner’s personality, not just create another ho-hum car that wears the right “uniform” for its genre. Granted, certain ideas work well, and have an established following… an early generation Mustang or Chevelle, for example, on 18’s and 19’s and sitting low looks good, it’s a given. However, simply adhering to one look closes so many doors, creatively speaking, that you rob yourself of exploring the car’s full potential. It’s far too easy to just plug in a formula to achieve a certain look… Of course, there are always budget constraints and whatnot, but this is where careful, creative planning in the earliest stages can make any car into a unique, personal statement.
 
Obviously, if you like a style of car, you should go for it… I’d never suggest change for the sake of change. Don’t just plop a heap of “different”" on top of an over-used motif just to stand out… To stretch the metaphor, if a singing impersonator is good, a fire-eating, sword-swallowing, contorsionist skydiving crooner may not always breed better results. Break the formula where you can, and stretch your imagination, but keep good taste in mind. What my funk and subsequent anger about these recent cars boils down to is that I am SICK (all caps… I’m yelling because it pisses me off to see this) of seeing third-rate work and “design” being celebrated, causing, essentially, the public at large to settle for third-rate as being the “state of the art”. Awesome. Let’s just cut our feet off here, and call this the pinnacle of the hobby/industry, and quit now.

I say “no f-ing way”. I know that there are some talented designers and builders out there pushing forward every day, who feel the same as I do about this, and by golly, we’re not drinking the Kool Aid.

All it really boils down to is that if all cars were built using the “formula method”, every car would simply mimic another, and, in effect, be just another Elvis impersonator.

And that’s just not fair to anyone, much less your clients…

Check out my work and design approach at PCK Studios.

An Italian delicacy…

…from the land of back bacon, Hockey and beer!

Can your Fiero do this?

I get around a bit, and have had the honor of meeting some truly great people over the course of my life and career… Often times, I get an introduction to someone through a current client, or referred by another, and occasionally, I just stumble to the right place at the right time, and make a new friend. The latter is true with Ryan, who happens to be a very creative and talented fabricator in the Great White North. We crossed paths, and hit it off almost instantly. I had been admiring his work, and was stoked to find that he was admiring mine as well! Always fascinated with anyone who works with steel, I was just mesmerized with his vision and abilities.

Schooled at BCIT in Vancouver, Ryan landed a great job at Fabrite Services in Cranbrook, and spent the next ten years at that great company,working up from cutting material and cleaning up, to an eventual role as shop foreman… While there, beyond being treated “like family”, he learned that “some people have some strange things to be built!”, as he puts it.

Gratuitous in-progress shot!

He also has some great mechanical skills, which he owes to both his father, and a natural curiosity as a kid. Fast-forward, and he’s completing the first of his planned series of supercar-inspired rides, a Reventon/Murcielago-looking beast, based on a Fiero platform he purchased for the princely sum of $60 just about a year ago…

Knowing he got a great deal on the car, he didn’t want to leave it stock, and certainly didn’t want another fiberglass-wearing “kit” car. As the Fiero sat outside until December that year, he saw a Lamborghini Reventon, and knew just where to go with the wedge-shaped Pontiac. Researching the original car’s measurements, Ryan was off to the races, buying the steel, ordering glass from James at AGP, and finally, an intercooled, twin-turbo 350 Chevy and 6-speed trans with modified G6 axles, offering more than ample pulling power for the 3200 lb. ride. Add to that 11 1/4-inch cross-drilled and slotted rotors with Cadillac (rear) and Camaro (front) calipers, slowing it down should be well-controlled.

Dashing, isn't it?

The only regret at this point? “I’ll have to paint it”, says Ryan, “and cover up all of that work!” But fear not, as Ryan and I are getting the wheels moving on the next project, a Bugatti-inspired, home-built supercar that’ll bring in some elements from other great Italian exotics, and mix in some original styling points that we’re kicking around… and that means some more months of looking at bare steel!

Getting there...

Look for more updates as this beast nears completion and hits the road soon, as well as some previews of the design studies for his next home-built super car… In the meantime, keep an eye open over at Problem Child Kustoms Studio for more design/insight and delirium…

If they made you feel safe…

…well then, by golly, they wouldn’t have been as fun, now would they?

A lot like the Millenium Falcon: Not much to look at, but had it where it counted. I am a nerd.

And they certainly wouldn’t have been hot rods.
I got to thinking the other day while cruising across the Valley to work on a project, about what makes a hot rod so damn much fun. Granted, this isn’t the kind of thing that should involve any thought to begin with (for cryin’ out loud, they’re freakin’ HOT RODS. What more needs to be said?!), but it brought to mind my teenage years, and the siren-like lure of hot rods and street machines in general. 
In my circle of friends, we didn’t have the biggest budgets for cars, and we made due with what we had and could barter for or get our hands on with our relatively tiny paychecks. And looking back on it, it made for some interesting, if not terrifying rides. Sure, none of us had what the sticklers today would call a “traditional” rod or custom, but, if you stop and consider it, how much more traditional can a car get than when you stuff waaaaaayyyy too much power into a car that really shouldn’t have that much? Sounds pretty grass-roots to me.
I could sit here and tell the tales of a Pontiac-powered ‘83 Thunderbird (well, it needed an engine, and wouldn’t you know it, that Pontiac slid in on a combination of Ford frame mounts and Poncho block-side mounts. Sounded good to us!), a big block Chevy-powered ‘68 Firebird (where’d ya think that Pontiac mill came from?), a series of super-quick Mustangs and G-Body Cutlass and Monte Carlo’s… or even Bullitt-style jaunts to work, leaving late, but managing to arrive just on time. But the point here is that feeling you get when you slide into a car that’s got a bit too much under the hood, and maybe wasn’t ever meant to have it.
I recall my buddy’s ‘78 Firebird, with a healthy small block and 4-speed, tearing up the streets after school… Always just on that ragged edge, where you want to dig your fingers into the dash pad, but you can’t seem to stop laughing enough to reach forward, especially on that clutch-less shift to third… Or maybe you were too occupied with holding parts on the car. White-knuckle rides in a certain cranberry-colored ‘73 Cutlass etched some scenes into my brain, and probably a few stains in the underwear of the hapless folks occupying the next lane. Or holding on for dear life in another friend’s Sebring with a super-stout 440. Yeah, my Chevelle was fun, but had slightly more civility, having been more carefully watched over during construction by the fine folks who not only gave me life, but a garage to park and work in. My ‘72 Monte, however, was put together quickly in the driveway and always had that “recipe for disaster” feel to it, and just begged to be driven as such (nothing beats brake lines held together with a half-dozen unions, one seatbelt, and an uncanny ability to vapoirize tires with a mash of the go-pedal). It remains one of my all-time favorites, and I only owned it for a short period.
My parents had a ‘55 Chevy for a bit that fell into this category… with a primered body, sitting tall on black steelies and dog-dish caps, with that high-winding 283 (with killer M/T valve covers, too!), a Muncie, and 4.11’s, it was dangerously quick, and made you feel guilty just standing near it… and you know what? I loved that.
I’m not talking about some half-assed “rat rod” turd bucket that’s deliberately thrown together with reckless abandon, or some poorly engineered (on purpose) “hey, dig me!” fairgrounds dumpster… Nor am I glorfying the utterly retarded things we did as kids… but more to the point, I’m finally at terms with what got me so deep into cars in every respect:
The whole feeling of riding that edge, whether you were screwing around on some back road, or just idling through the local cruise night parking lot. You felt like all hell might break loose at any second, and by golly, you were racing toward that moment. Fortunately, we seemed to, for the most part anyway, escape certain doom and live on into our 30’s and ’40’s… pretty well adjusted at that. Except that burning urge to throw that old small block into the wife’s mini van, of course… but that seems natural…

Taking CAB’s Coupe for a spin…

…halfway around the globe, and finding a new home in Europe! 

Some time ago, I was fortunate to have befriended skateboarding legend, artist, and all-around good guy Steve Caballero. Like all of my artist and hot rod friends, his work and cars are inspirational, and it all kind of becomes like family. You grow attached to the paintings, cars and whatnot, and when a ride or canvas gets sold, you feel a slight twinge of sadness, and hope that the new owner will take good care of it (kinda like my old Chevelle… it’s comforting to know it’s being enjoyed and cared for!).

 

You have to imagine my joy, then, when CAB’s coupe was sold once more, and wound up, in all places, in the garage of a friend across the ocean! Geert (aka Von Skip), is a talented artist, and we hit off our friendship through our work, sharing a mutual admiration for one another’s style and technique. What this guy does on canvas is amazing (<a href=”http://www.vonskip.com/custom_car_art.html”>dig it here!</a>). He’s owned a number of outstanding cars, and when he saw the opportunity to grab CAB’s coupe, well… I became stoked on a number of levels. After all, what are the odds? Two talented artsists (and great people) as owners of the same great car? Two separate continents… and each sharing the same incredible car culture. (and you thought the Dutch were only into wooden shoes and windmills. Shame on you. They like hot rods and customs, too… so there.) 

The world really is a small place, and lately, I’ve come to the conclusion that all things happen for reason. Thankfully, for whatever reason, I made the connection with two incredible people, and one fantastic car, and I get to see how it all plays out in the grand scheme of things. 

…and, as if creating great art, collecting killer cars and just being an all-around cool cat weren’t enough, on June 2nd, Geert and Nanouk welcomed their beautiful baby girl, Moenza into the world! 

Congrats again, Geert!! Enjoy the ride, man…

While the cars are great…

…it’s the people that make this such a great racket. Case in point: last weekend Craig (fromMyRideIsMe.com) was rounding up hands to help in stripping his ‘63 Falcon wagon in preparation for a full-on makeover. And by golly, when the local boys call for help, I’m there. Occasionally, it’s good to put down the pens and stylus and turn a wrench or two… it keeps you grounded in the real stuff… the stuff that got you into this business to begin with.

…and there we were, a small group that would grow to over a dozen before night’s end, attacking the car with near-Overhaulin’ precision, save for the most stubborn windshield on planet Earth (more on my glass nemesis later). What was to be a simple transmission swap was quickly escalted to a “while we’re at it…” sort of project.. which means “look for some concept art soon”. 

That Craig sure knows how to pick friends, huh? From “Falcon Master” Mike (a walking encyclopaedia of all things Falcon and Comet-based) to Racin’ Dave (runner-up in Super Street this year at Fontana (and 0.054 seconds from a Wally!!), to the always handy and knowledgeable Rob (who brought his killer bobber truck over and aired it out, as if that thing needed any more attitude!), you’d think we had all bases covered.

Hardly. 

Dave and his charming wife popped in before heading to a graduation party to offer moral support, and before we knew it, there was Joe and Joel and Devin grabbing tools and jumping in. I mention all of these folks because it’s what makes this hobby so great: The people. All of us are from different backgrounds, lives, careers… Yet we share the common car bond. It’s that great equalizer, that certain “something” that brings people togteher and gets everyone reaching for a common goal. 

When Doug (of Squeeg’s Rod and Kustom) popped in (with Sammy and Moose from the shop in tow, following a trek to Southern California to pick up a Woody), all of that “car guy” stuff became clear. Here’s a pro builder of the highest degree, wrenching on a local car. No glory in this, just stripping away what needed to go, and getting the ball rolling. It’s just that whole “you’re building a car? I’m THERE!” mentality that happens to come across between car people. It’s the late nights spent in a garage, covered in grease and bondo dust that creates memories, and makes it all so damn cool to be a part of… 

Anyway, this is where it sits for now… Look or more on this project as we build steam, and get the old girl rolling once more…

Three issues…

…on the shelves at once with my work is always a cool feeling! (now there’s an understatement) I’ve been fortunate to have my work in print in Rod and Custom, American Rodder, and now Truckin’ this month, making it a great start to the Summer months! I hope you find time to pick up all three of these issues, if not for the artwork, but the great content in all of them.

The amazing Mercury wagon in American Rodder is worth the price of admission alone, we’ve already been over the amazing ‘54 Merc (hey, I see trend here) in R-n-C, and the special horsepower section in Truckin’ makes for some good reading as well!
Thanks to Dan over at Truckin’ for slipping my artwork once again into the Radical Renderings pages (and look out soon for a project that he and I collaborated on, which spawned some great concept art!). I hope you enjoy them all as much as I did creating them…

An a-Maze-ing Follow-up!

…and how killer is this??! A while back, I had written a bit about one of the more influential custom cars in my past, Mr. Jerry DeVito’s ‘57 Ford, aptly named “The Maze” (first part is here, and the second part here). I had reported what I found through research on the car, and was left with a few lingering questions about the car… so I did what was natural, and asked for help finding those answers.

I was fortunate to not only find those answers, but got them FROM THE MAN HIMSELF! Mr. DeVito took time from his day to chat for a while, and I walked away from that great conversation with not only some fantastic insight, but a great new friend. I’ll report more on this soon, but wanted to share my excitement over meeting the man who created a car that left an impression on me as a car-struck kid, and one that always creeps into my imagination as I draw and design.

Suffice to say, there are a few facts that need ironing out from the first posts on this car (as I said, the research materials were limited), and we’ll do just that in subsequent posts… But to answer that nagging question about the split bumper treatment, they were ‘57 Pontiac units, and the change was made in the first year (after the peaks and scoops). Jerry’s inspiration was to always keep the car fresh, making changes after each show, always remaining at the of of his game…

We’ll trace the car’s history in the near future, from delivery at San Jose Ford in ‘57, through to its sale, and subsequent loss. Thanks for the interest, and especially to Mr. DeVito… wow…

Memorial Day weekend…

…and we’re not heading too far from the Studio, what with gas prices going haywire, work on the boards and so on… But I wanted to wish everyone a happy and safe holiday, and take a moment to thank all of our servicemen and women, both past and present for their service, sacrifice and dedication, and take a moment to honor those who have fallen, protecting this great country, and making it possible for us to enjoy this hobby so much more each day.

If you’re currently enlisted, or have been in the past, and are looking to pick up a shirt or print before June 1st, hit us up HERE for a coupon code prior to placing an order, and we’ll make sure you get free shipping, as well as something extra thrown in… It doesn’t compare to what you give each day, but I thought we’d try to express our thanks in some way. Thanks again, and have a great Memorial Day weekend…

Rod and Custom Magazine Feature!

Dreams…

…have a funny way of mixing things together. Consider just about any weird dream you’ve ever had… you know, “it was my house, but it wasn’t my house, you know?”… Ever said that? Or maybe you wind up working at a job that you’ve never had… eating something odd, bizarre or exotic… Odd things happen in our subconscious.

Such was the case a few months back when Tim at Rod & Custom Magazine hit me up to create a “Dream Car of the Month” again.

I absolutely love creating artwork for the “Dream Car of the Month” in Rod and Custom Magazine. I dig it because it’s not only the magazine I grew up dreaming of being published in, but the project affords a completely open-ended spectrum of creativity. For this go-round, I took the “dream” part literally, and scoured my subconscious for wild ideas…. What came from it all is a mish-mash of A/FX, gasser, funny car, street machine… You kinda have to see it to believe it…

And even if you’re not a big fan of spicy taco-induced dream cars, grab this iissue if you don’t already have it. The features this month are just outstanding, from Mark Morton’s bsolutely understated ‘54 Mercury that we drooled over at the GNRS in January, to Rob Ida’s unbelieveable Caddy, and the super low, super cool ‘32 three window of Larry Roller… The details will have your head spinning for days!

Thanks again to Tim and Kevin at R-n-C for another great opportunity..